Poly is aware of persistent cyber threats targeting unified communications devices that have been deployed in an insecure manor where manufacturer provided default passwords or PINs have not been changed.
High
PLYGN19-01
01/18/2019
03/07/2022
Poly
Cyber actors are scanning the internet for devices that are deployed, using default passwords and PINs. The malicious actors are attempting to gain unauthorized access to these devices to retrieve device and customer specific configuration information. This information may then be used to: Gain intelligence related to the network configuration of the environment where the device is deployed; and,
Customers are encouraged to follow recommended best security practices:
There is no workaround.
This document has been revised according to the following information.
Version |
Description |
Date |
---|---|---|
2.0 |
Format changes |
03/04/2022 |
1.1 |
Updated Acknowledgement |
01/24/2019 |
1.0 |
Initial Release |
01/18/2019 |
Follow these links for additional information.
Third-party security patches that are to be installed on systems running Poly software products should be applied in accordance with the customer's patch management policy.
Any customer using an affected system who is concerned about this vulnerability within their deployment should contact Poly Technical Support – (888) 248-4143, (916) 928-7561, or visit the Poly Support Site.
To view released Security Bulletins, visit https://support.hp.com/security-bulletins.
It is strongly recommended that security related information being communicated to HP be encrypted using PGP, especially exploit information.
©2022 Plantronics, Inc. All rights reserved.
TrademarksPoly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc. All other trademarks are property of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, for any purpose other than the recipient's personal use, without the express written permission of Poly.
DisclaimerWhile Poly uses reasonable efforts to include accurate and up-to-date information in this document, Poly makes no warranties or representations as to its accuracy. Poly assumes no liability or responsibility for any typographical errors, out of date information, or any errors or omissions in the content of this document. Poly reserves the right to change or update this document at any time. Individuals are solely responsible for verifying that they have and are using the most recent Technical Bulletin.
Limitation of LiabilityPoly and/or its respective suppliers make no representations about the suitability of the information contained in this document for any purpose. Information is provided "as is" without warranty of any kind and is subject to change without notice. The entire risk arising out of its use remains with the recipient. In no event shall Poly and/or its respective suppliers be liable for any direct, consequential, incidental, special, punitive, or other damages whatsoever (including without limitation, damages for loss of business profits, business interruption, or loss of business information), even if Poly has been advised of the possibility of such damages.